Our Location
304 North Cardinal St.
Dorchester Center, MA 02124
Material
A reliable product is made of superior material. We adopt first-class imported calendering copper for FPC, the thickness of copper reached to 4OZ, which is featured by its good conductivity and folding resistance. LED for standard orders are used from China top package manufacturers, which adopt Epistar chip for all white colors. The package and glue are cater-designed for outdoor products.
The materials of housing and body for LED linear flex are made by modified PVC or Silicone material, which is specially designed for using outdoor, even harsh environment. The material adopted is resistant to UV, yellowish, solvents, saltwater, and dirt. The silicone material used is gas phase silicone which has much better performance of tensile strength and anti-aging than common silicone.
LED Chips
Chips for standard products is Epistar and packaged by ShenZhen top manufacturer. CREE, Lumileds are optional for Mono series. We keep one bin only by requesting LED supplier and using Kingdee ERP system for management. Furthermore, CRI95, R9, 3 Step MacAdam LED are optional.
Housing Materials
PVC or Silicone housing is optional. The quality of materials are quite different in the market. Based on our patented process technology we seal our products in a continuous cover of high quality material, which is resistant against UV, corrosion, solvents and saltwater.
FPC
Optimized heat transfer to housing to ensure lifespan and color consistency. Minimize the voltage drop to ensure same brightness from 0.1m to 20 meters. It’s reliable for bending in performance.
Waterproof IP68
This stainless steel waterproof device is a very important waterproof accessory for outdoor bare wire products. The theory is by breaking the copper wire, re-welding with interrupter, then sealing the welding joint by mold-injecting high density & high viscosity material, so that LED linear flex is completely isolated from the external wiring, realizing that the wiring can not be penetrated with any air or moisture, in spite of the pressure and temperature aroused from LED linear flex.
Cable with female & male connector
The male & female waterproof connector is made by two layers of injection molding with high viscosity TPU and high density nylon material inside. The quality control is conducted by blow test with air in water and the result should be without any bubbles. After locked by the stainless steel locking ring, it has outstanding reliability and waterproof performance with IP68 rating.
Mold injection
Advantage:
1. IP68 waterproof rating, suitable for extreme harsh applications like pool, salt, and seaside.
2. High reliability, pre-installed in factory with various quality tests before shipment.
3. Cost-saving for installation, contractors don’t need to spend labor and time on connector assembling.
4. Seamless joint realized by side and bottom cable entry.
Disadvantage:
1. Can not DIY.
2. Length needs to be provided before order.
DIY Connectors
Advantage:
1. Flexible customization, can be cut and re-connected by end-user.
2. IP67 waterproof rating for normal outdoor environment.
3. More suitable for retail and end-user market.
Disadvantage:
1. Can not be used underwater.
2. Reliability varies from different workers.
3. Seamless joint can not be realized.
Available to customize the color temperature from 2200K to 6500K, Color like R/G/B/LY/P/A/O.
Available to customize CRI, R9.
Available to customize printing Logo. Logo, cutting marks, or branding.
Available to customize the labels.
Available to customize the length. Length of LED linear flex catered to your projects.
Available to customize the cable.Like the length of cable.Standard length=0.6m (Bare wire) 0.3m (with male/female connector)
Available to customize the package. Plastic plate is suitable for selling & paper reel packing is using on project.
Available to customize different mold injection connector (direct, side, bottom entry)
